Zhejiang Xinglian Vehicle Technology Co., Ltd
Zhejiang Xinglian Vehicle Technology Co., Ltd
Add to Cart
The new Red Flag HS5 charm points are numerous, and many highlights are summarized into mH5, where m is the meaning of many, H is the charm point and highlight, and the fifth power is the five characteristics: the core is to enjoy the honor, to enjoy the beauty, to enjoy the comfort, to enjoy the intelligence, to enjoy the safety.Hongqi HS5 is equipped with a low-power CA4GC in-line four-cylinder turbocharged direct injection engine with a rated power of 165kW and a maximum torque of 340N·m. Independently developed by FAW Group, the engine adopts ten industry-leading technologies, such as high compression ratio Miller cycle combustion technology, 350bar precise fuel injection technology, full MAP intelligent thermal management technology, and all-aluminum lightweight engine technology, with a thermal efficiency of 39%.In terms of interior, the entire center console has been redesigned, with more streamlined lines inside the car and a larger decorative panel area. The light colored wood grain trim looks more elegant. The dual screen design has been retained, and the air conditioning has been changed to a button and knob style. A wireless charging area has been added to the lower part, and the entire gear lever area has been re optimized.The active/passive safety configuration of the Hongqi HS5 is very complete, including child seat interface, brake assist (BA/EBA/BAS, etc.), tire pressure monitoring, collision warning/active braking, heated steering wheel, HUD head up display, anti lock braking (ABS), brake force distribution (EBD/CBC, etc.), side air curtains, traction control (ASR/TCS/TRC, etc.), vehicle stability control (ESP/DSC/VSC, etc.), rear parking radar, LED daytime running lights, front parking radar, automatic parking Uphill assist, hill descent control, automatic parking, engine start stop, lane keeping (LKAS), full LCD instrument panel, fatigue reminder, wireless phone charging, streaming media rearview mirror and other configurations. Product features:
| manufacturer | Faw Hongqi |
| rank | Medium and large vehicle |
| Energy type | gasoline |
| Time to market | 2023.08 |
| Maximum power (kW) | 208 |
| Maximum torque (N-m) | 400 |
| engine | 3.0T 283hp V6 |
| gearbox | 7 Wet double clutch |
| Length * Width * Height (mm) | 5137 * 1904 * 1493 |
| Body structure | Four-door, five-seater sedan |
| Maximum speed (km/h) | 245 |
| Official 0-100km/h acceleration (s) | 7.1 |
| NEDC combined Fuel consumption (L/100km) | 9 |
| WLTC Combined Fuel consumption (L/100km) | 9.20 |
| Length (mm) | 5137 |
| Width (mm) | 1904 |
| Height (mm) | 1493 |
| Wheelbase (mm) | 3060 |
| Front wheel base (mm) | 1633 |
| Rear wheel base (mm) | 1629 |
| Approach Angle () | 16 |
| Departure Angle () | 17 |
| Body structure | Three-compartment car |
| Door opening mode | Swing door |
| Number of doors (each) | 4 |
| Number of seats (PCS) | 5 |
| Tank capacity (L) | 62 |
| Trunk volume (L) | 370 |
| Service weight (kg) | 1995 |
| Maximum load weight (kg) | 2505 |
| Engine type | CA6GV30TD-07 |
| Volume (mL) | 2951 |
| Displacement (L) | 3.0 |
| Intake form | supercharging |
| Engine layout | Place sth. vertically |
| Cylinder arrangement | V |
| Number of cylinders (PCS) | 6 |
| Valve per cylinder (number) | 4 |
| Valve mechanism | DOHC |
| Maximum horsepower (Ps) | 283 |
| Maximum power (kW) | 208 |
| Maximum power speed (rpm) | 4780-5500. |
| Maximum torque (N-m) | 400 |
| Maximum torque speed (rpm) | 2500-4780. |
| Maximum net power (kW) | 200 |
| Fuel form | gasoline |
| Fuel oil label | Number 95 |
| Oil supply mode | Direct injection |
| Cylinder head material | Aluminium alloy |
| Cylinder block material | Aluminium alloy |
| Number of gears | 7 |
| Transmission type | Wet dual-clutch Transmission (DCT) |
| For short | 7 Wet double clutch |
| Driving mode | front-rear-drive |
| Front suspension type | Double fork arm independent suspension |
| Rear suspension type | Trapezoidal link type independent suspension |
| Assist type | Electric power assist |
| Car body structure | self-supporting |
First, our company has a professional production workshop, the production workshop is equipped with advanced high-tech equipment, these equipment are placed in stamping, welding, painting, final assembly four workshops. The main equipment of the first two workshops includes drive machine, levelling machine, flattening machine, plate rolling machine, bending machine, shearing machine, hydraulic press, punching machine, sawing machine, cutting machine, arc welding machine, CO2 protection welding machine, tube bending machine, skin pulling machine, resistance welding machine, ion cutting machine, etc.
Q:What is the delivery time?
A: Delivery times vary by model, please contact our sales/online service.